Wednesday, September 14, 2011

I get start windows normally screen all time i boot my xp,help me to solve this.?

i get error message all the time when i boot my xp as ';Sorry for the

incovenience... a recent hardware or software change might

have caused this...'; Within the message, there are options

to start windows in safe mode, use last known good

configuration, start windows normally, etc. I have tried

all the given options, as well as updated my Windows. how can i solve this problem? i dont want to lose my updates by reinstalling windows xp again.( i recently installed intex tv tuner card after that i am getting this error,).it takes long time to boot(2-3 min). everything works perfect after booting. please help me to solve the problem.

thank you.I get start windows normally screen all time i boot my xp,help me to solve this.?
First, disconnect the computer from all cabling, open it up and ensure your TV card is properly seated into its slot. If it looks OK, remove it and re-insert it, there might be bad contact on one or more of the pins. If oyu have another open slot you could also try putting it there.



Boot up to see if it works.You should also try booting up without the card installed to see if it boots up without a problem.



If this does not solve your problem then uninstall the software that came with it and re-install it. Ensure you use an XP version, not a version for previous OS.



If this still does not fix your problem send the card to the manufacturer for warranty repairs. Before the warranty runs out.I get start windows normally screen all time i boot my xp,help me to solve this.?
The device itself or the drivers for your device are crashing Windows. Focus on that device--get updated drivers or get it replaced/removed.
you have the answer already.. try to update the drivers for intex tv tuner if any.



Also do you follow the proper shut down procedure?
first thing is to obviously uninstall the tv tuner thing to see if that helps, also are you shutting your computer down correctly if you just turn it off then you will get that message

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.